Ultrasonic Flow Meters

20+ Years Manufacturing Experience

Support

  • Can QSD6537 sensor measure liquid level by pressure sensor and ultrasonic sensor at the same time ?

    For our QSD6537 sensor, it is two ways to measure liquid level by pressure sensor and ultrasonic sensor .  When it works, only one way can be set for level measurement either pressure depth sensor or ultrasonic depth sensor .    It means they can’t work at the same time. Level measurement m...
    Read more
  • Clamp on ultrasonic flow meter

    Clamp on ultrasonic flow meter is a kind of flow meter that suits full pipe liquid measurement with installation conveniently and non-contact .It can not only measure the liquid flow for large pipe diameter, but also can be used for measuring the liquid that is not easy to contact and observe. In...
    Read more
  • Advantages of high-precision ultrasonic flow meter

    External clamp on ultrasonic flow meter can realize non-contact flow measurement, even if it is insertion ultrasonic flow meter,it is almost zero pressure lose;  The cost of ultrasonic flow meter is almost irrelevant to the pipe diameter, it is very big advantage to choose flow meter for large d...
    Read more
  • Characteristics of high-precision ultrasonic flow meter

    Digital processing technology, strong anti-interference ability, more accurate measurement value, stable signal, etc ; No mechanical parts, long lifespan and no maintenance ; The circuit is more optimized, high integration; Low power consumption and high reliability. Intelligent signal output, i...
    Read more
  • When you are hesitating to use electromagnetic flow meter or ultrasonic flow meter, you can refer to below of the following aspects .

    1. Liquid properties If the liquid cannot electricity conductivity, the only one selection is ultrasonic flow meter . 2. On-site environment Generally, ultrasonic flow meter is susceptible to electromagnetic wave interference. If there is an object which emits electromagnetic wave on site, it ...
    Read more
  • Some points for Transit time ultrasonic flow meter for air conditioning water application

    Air conditioning refrigeration and cooling water systems can be measured by our TF1100 serial clamp on or insertion transit time ultrasonic flow meter . 1. Correctly select the position of the measurement point and the installation mode of the sensor to ensure the normal and stable meter’s ...
    Read more
  • For air-conditioning water system, how to select the measurement point ?

    To ensure the accuracy of flow measurement for air conditioning water, clamp on ultrasonic flow meter should be installed at the part of uniform fluid flow . Pls follow below points to select it . 1. The fluid in the measured pipe must be full of pipe . 2. The pipeline material to be tested shou...
    Read more
  • Ultrasonic flow meter flow measurement for power supply industry

    Ultrasonic flow meters have some outstanding application advantages and it is widely applied in power supply flow measurement . 1. For hydropower station flow measurement ; It is necessary to measure the flow rate of circulating water, customer needs to measure large size pipe ( from DN3000 TO DN...
    Read more
  • Some characteristics of ultrasonic flowmeters

    Nowadays, Ultrasonic flowmeter has gradually replaced traditional turbine flowmeter, differential-pressure DP flowmeter, electromagnetic flowmeter and other flow meters. From different perspectives, it can be known that ultrasonic flowmeter has the following advantages in practice. 1. The instal...
    Read more
  • The description of ultrasonic flow meter

    1. Brief Introduction Ultrasonic technology flow meter is comprised of calculator and ultrasonic sensor. Paired ultrasonic sensors include non invasive sensor, insertion sensor and the sensor that is attached to inner pipewall or the bottom of channel . Clamp on transit time ultrasonic transducer...
    Read more
  • To choose flow meter, what factors you should consider ?

    1. What kind of liquid you will measure ?  2. What is the diameter of the pipe measured ? What is the pipe material ? 3. Is the pipe always full or not full water ? 4. What is the min. and max. process temperature of your application ? 5.  Confirm flow meter type, do you need clamp on, inline or ...
    Read more
  • What are typical applications for transit time ultrasonic flowmeters?

    Our clamp on ultrasonic flow meter transit time can measure water flow, heat function and temperature measurement are optional with PT1000 sensors. 1. Water, sea water, pure water 2. HVAC Airconditioning 3. Municipal Water 4. Liquid flow system checking 5. Chemical liquids 6. Semiconductor and El...
    Read more

Send your message to us: