Ultrasonic Flow Meters

20+ Years Manufacturing Experience

Support

  • SC7 water meter features

     The low starting flow, minimum flow rate is lower than the 1/3 of the traditional water meter;  Bi-directional flow measurement  The water temperature detection, temperature alarm;  No moving parts, no wear, can be long-term and stable operation;  The power supply of water meters is ensure...
    Read more
  • Installation considerations for LMU level meter

    1. General hints Installation must be carried out by trained person in accordance with the manual. The temperature of the process may not exceed 75℃,and the pressure may not exceed -0.04~+0.2MPa. The use of metallic fittings or flanges is not recommended. For exposed or sunny locations a protect...
    Read more
  • Ultrasonic level meter

    Continuous non-contact level measurement with compact version; Integrated design, installed conveniently; Protected in the excessive voltage and current , protected in the thunder and lightning; The big show window of LCD or LED is easy to debug and observe; Excellent anti-interference capabilit...
    Read more
  • Temperature sensor installation for RC82 heat meter

    Distinguish supply and back water Temperature sensor of heat meter had each one supply water temperature sensor and back water temperature sensor, temperature sensor with red label should be installed supply water pipeline, and sensor with blue label should be installed back water pipeline. Insta...
    Read more
  • Installation Precautions for RC82 ultrasonic heat meter

    alve installation before and after heat meter and filter, easy for heat meter maintenance and filter cleaning. Please notice valve opening sequence: open slowly valve before heat meter in inlet water side firstly, then open valve after heat meter outlet water side. Finally open valve in back w...
    Read more
  • Advantages of Doppler ultrasonic flowmeter

    The traditional electromagnetic flowmeter is very complicated in the installation and use of the operation, the pipe segment sensor needs to be added to the pipeline before the pipeline is installed, once it is damaged or never installed, it must be sawed open, which also needs to throttle the pi...
    Read more
  • When installing ultrasonic flowmeters, what factors cannot be ignored ?

    Ultrasonic flowmeter selection installation point must consider the following factors: full pipe, steady flow, scaling, temperature, pressure, interference and so on. 1. full pipe: Choose a pipe section filled with fluid material uniform quality, easy to ultrasonic transmission, such as vertical ...
    Read more
  • What are the main advantages of high-precision ultrasonic flowmeter ?

    High precision ultrasonic flowmeter features: 1. signal digital processing technology, so that the instrument measurement signal is more stable, strong anti-interference ability, more accurate measurement. 2. no mechanical transmission parts are not easy to damage, maintenance-free, long life. 3....
    Read more
  • Ultrasonic flow meter for power plant application

    Ultrasonic flowmeter is composed of ultrasonic transducer and transmitter. It has the characteristics of good stability, small zero drift, high measurement accuracy, wide range ratio and strong anti-interference, etc. It is widely used in tap water, heating, water conservancy, metallurgy, chemica...
    Read more
  • What factors will the measurement result of transit time clamp-on ultrasonic flow-meter be affected ?

    Old pipe and heavily scaled inner pipework. The material of the pipe is uniform and homogeneous, but this kind of pipe is with bad acoustic-conductivity. Painting or other coatings on the outer wall of the pipeline are not removed. The pipe is not full of liquids. A lot of air bubbles or impurit...
    Read more
  • Flow measurement for demineralized water

    In power production, the amount of demineralized water in power plants is quite large, how to effectively measure the demineralized water is a more concerned problem for users. According to the traditional flowmeter selection method, it is generally the choice of orifice flowmeter, or turbine flo...
    Read more
  • Classification of ultrasonic flowmeters

    There are many kinds of ultrasonic flowmeters. According to different classification methods, it can be divided into different types of ultrasonic flowmeters. (1) Working measurement principle There are many kinds of ultrasound flowmeter for closed pipelines according to the measurement principle...
    Read more

Send your message to us: