Ultrasonic Flow Meters

20+ Years Manufacturing Experience

Support

  • How to choose the installation position of the ultrasonic flowmeter?

    1. Avoid installing the machine in the water pump, high-power radio and frequency conversion, that is, where there is strong magnetic field and vibration interference; 2. Select the pipe segment with uniform density and easy ultrasonic transmission; 3. There should be a long enough straight pipe ...
    Read more
  • Various ultrasonic flowmeters have been widely used in industrial production, commercial metering and water testing

    Various ultrasonic flowmeters have been widely used in industrial production, commercial metering and water testing, such as: In the measurement of raw water, tap water, water and sewage in the municipal industry, the ultrasonic flowmeter has the characteristics of large range ratio and no pressu...
    Read more
  • Ultrasonic flowmeter and electromagnetic flowmeter respectively characteristics and differences

    Ultrasonic flowmeter and electromagnetic flowmeter are common industrial flow measurement equipment, each of which has different characteristics and application fields. Ultrasonic flowmeter: Features: 1. Non-invasive, no pressure loss; 2. Easy installation, low maintenance cost; 3. Wide measuring...
    Read more
  • Application of handheld ultrasonic flowmeter for heat field

    The principle of handheld ultrasonic flowmeter and its application in heating industry In the heating industry, handheld ultrasonic flowmeters are widely used in many fields: Heating pipeline flow detection: real-time detection and monitoring of heating pipeline flow can be carried out to ensure ...
    Read more
  • Ultrasonic flowmeter applications

    With the improvement of industrial level and productivity, flow measurement has become an indispensable technology in many fields. Ultrasonic flowmeter is one of them, it is widely used in chemical, electric power, water supply and other industries. This paper will introduce the principle, charac...
    Read more
  • Installation requirements for TF1100 series wall mounted ultrasonic flowmeters

    Correct installation is the prerequisite to ensure the normal operation and accurate measurement of the TF1100-EC stationary ultrasonic flowmeter. The following are some requirements for the installation of fixed ultrasonic flowmeters: 1. Installation position The fixed ultrasonic flowmeter shoul...
    Read more
  • DF6100 Doppler flow meter applications

    There are many factors affecting the water flow rate. For example, urban drainage pipes, if the siltation leads to the pipe wall is not smooth, the flow rate will be blocked and slowed down. The longer the pipe, the greater the loss along the way, and the slower the flow rate. Drain pipe diameter...
    Read more
  • Volume Display Options For ultrawater water meter

    a) The display resolution of cumulative traffic can be changed by Modbus. The default display resolution is 0.001 Unit. b) Accumulated flow can choose positive accumulation, negative accumulation and net accumulation,The default display is net accumulation. c) When the display value of minimum r...
    Read more
  • Flow range for ULtrawater series ultrasonic water meter

    Class 1 smart water meter with remote control Ultrasonic Water Meter Bulk Water Meter For DN50-DN300 Pipes, its standard output is RS485 Modbus, for others outputs, pls contact us.  
    Read more
  • Introduction for Lanry ultrawater SS304 ultrasonic water meter

    Ultrawater series stainless steel ultrasonic water meter adopts dynamic zero point and time calibration before each measurement, which makes flow measurement more stable and accurate. Ultra-low power design, service life of up to 15 years; the whole machine does not have any moving parts, the ca...
    Read more
  • HOW TO PRODUCE AN ALARM SIGNAL FOR TF1100-CH ?

    There are 2 types of hardware alarm signals that are available with this instrument. One is the Buzzer, and the other is the OCT output. Both for the Buzzer and OCT output the triggering sources of the event include the following: (1) Alarms on when there is no receiving signal (2) Alarms on when...
    Read more
  • For TF1100-CH, HOW TO USE THE BUILT-IN DATA MEMORY ?

    The data memory has a space of 24K bytes of memory, which will hold about 2000 lines of data. Use M50 to turn on the data memory and for the selection for the items that is going to be logged. Use M51 for the times when the logging begins and at how long an interval sustains and how long the data...
    Read more

Send your message to us: