When you use temperature and flow transducers,it is usually used in pairs. The reasons as below.
For flow transducers,it can decrease the deviation of static zero;
For temperature transducers,it can reduce the deviation of temperature measurement. (by using two sensors with the same error value )
For our TF1100-EC clamp on ultrasonic flow meter with paired PT1000 temperature sensors,it can measure the flow and heat in liquid,the measured medium temperature is ranging from -35℃~200℃.
Features of wall mounted non invasive flow meter
1. Advanced Digital Signal Processor technology and the MultiPulseTM transducer technology
2. TF1100-EC is Clamp-on type, non-invasive system allows solids to pass through the pipe within effect on meter. Y-strainers or filtering devices are not needed. TF1100-EI is Insertion type, hot-tapped.
3. Digital cross-correlation technology
4. Since the sensors do not contact the liquid, fouling and maintenance are eliminated.
5. Provides easy and low cost installation by clamping on the outside of existing piping systems.
6. Clear, user-friendly menu selections make TF1100 simple and convenient to use
7. A pair of sensors can satisfy different materials , wide different pipe diameters
8. 4 Lines display, can display total flow, flow rate, velocity and meter run status. Parallel operation of positive, negative and net flow totalizes with scale factor and 7 digit display, while the output of totalize pulse and frequency output are transmitted via open collector.
Post time: Jul-07-2022