General :
The non invasive flow transducers that are utilized by the Series TF1100 contain piezoelectric crystals for transmitting and receiving ultrasound signals through walls of liquid piping systems. The clamp-on flow sensors / transducers are relatively simple and straight-forward to install, but spacing and alignment of the transducers is critical to the system’s accuracy and performance. Extra care should be taken to ensure that these instructions are carefully executed.
Mounting of the clamp-on ultrasonic transit time transducers is comprised of three steps:
Selection of the optimum location on a piping system.
Entering the necessary parameters into the TF1100 keypad. (TF1100 will calculate proper transducer spacing based on these entries (menu 25))
Pipe preparation and transducer mounting
Applications :
1. Water, sewage (with low particle content) and sea water
2. Water supply and drainage water
3. Process liquids; Liquors
4. Milk, yoghourt milk
5. Gasoline kerosene diesel oil
6. Power plant
7. The flow patrolling and examining
8. Metallurgy, Laboratory
9. Energy-conservation, economize on water
10. Food and medicine
11 Heat measures, Heat balance
12 On-the-spot check-up, standard, the data are judged, Pipeline leak detection
Post time: Jul-31-2022