Gear flowmeter is a type of instrument used to measure the flow of fluid. It usually consists of a gear and a flowmeter. The flow rate of fluid is calculated by measuring the speed of the fluid flow in the flowmeter.
When using gear flow timing, the following points need to be noted:
1. Ensure proper installation: Installation of gear flowmeters is critical to their accuracy and reliability, as such meters are usually installed horizontally in pipelines. When installed, gear flowmeters should be installed in a vertical position to ensure that they accurately measure fluid flow.
2. Ensure that the gear box is clean: The gear box is the connection between the gear and the flow meter, so it is necessary to ensure that the gear box is clean. If the gear box is not clean, it may affect the measuring accuracy of the flowmeter.
3. Choose the right viscosity: Gear flowmeters are usually suitable for some high viscosity fluids, so it is necessary to ensure that the viscosity is selected. Excessive viscosity may affect the measuring accuracy of the flowmeter, so the viscosity range of the gear flowmeter must be determined before use.
4. Regular maintenance: Gear flowmeter needs regular maintenance during use to ensure its accurate measurement of fluid flow. The common maintenance methods include regularly checking whether the gear box teeth are worn and whether the lubricating oil is sufficient.
In short, gear flowmeter is a very important flow meter, in use need to pay attention to ensure that its installation is correct, installation method is correct, viscosity range meets the requirements and other factors to ensure its accurate measurement of fluid flow.
Post time: Mar-13-2023