The advantages of MTF electromagnetic flowmeter:
(1) The measuring channel is a smooth straight pipe, which will not block, and is suitable for measuring liquid-solid two-phase fluids containing solid particles, such as pulp, mud, sewage, etc.
(2) It does not produce pressure loss caused by flow detection, and the energy saving effect is good.
(3) The measured volume flow rate is actually not significantly affected by changes in fluid density, viscosity, temperature, pressure and conductivity.
(4) the flow range is large and the aperture range is wide.
(5) corrosive fluids can be applied.
MTF electromagnetic flowmeter disadvantages:
(1) can not measure the conductivity of very low liquids, such as petroleum products;
(2) Gas, steam and liquids containing large bubbles cannot be measured;
(3) Can not be used for higher temperatures. Application overview: Electromagnetic flowmeter is widely used in the field of application, large diameter instrument is more used in water supply and drainage engineering; Small and medium caliber is often used in high requirements or difficult to measure occasions, such as steel industry blast furnace tuyere cooling water control, paper industry measurement paper slurry and black liquor, chemical industry strong corrosive liquid, non-ferrous metallurgy industry pulp; Small caliber, small caliber is often used in the pharmaceutical industry, food industry, biochemistry and other places with health requirements.
Post time: Nov-26-2023