Short Lead Time for Ultrasonic Water Flow Meter - SC7 Serials Water Meter – Lanry Detail:
Features
Key Technology Point
Display Description
Pressure Loss Curve
Dimension
Features
Above 10 years shelf life.
Installation at any angel, no influence for measurement accuracy.
Ultrasonic signal quality detection.
Photosensitive button, IP 68 design, longtime under water working.
Support optical, RS485 and wired & wireless M-bus communication interfaces.
Complies to MODBUS RTU and EN 13757 communication protocol.
Compile to drinkable water standard requirement.
Key Technology Point
Display Description
Pressure Loss Curve
Technical Parameter
Nominal Diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
|||||
Nominal Diameter Q3 (m3/h) |
2.5 |
4 |
6.3 |
10 |
16 |
|||||
Min flow rate Q1 (L/h) |
10 |
6.25 |
16 |
10 |
25.2 |
15.8 |
40 |
25 |
64 |
40 |
Pressure loss class △P |
63 |
63 |
40 |
40 |
40 |
|||||
Flow arte maximum reading (m3) |
99999.99999 |
|||||||||
Accuracy class |
Class 2 |
|||||||||
Maximum working pressure |
1.6MPa |
|||||||||
Temperature class |
T30/T50/T70 optional |
|||||||||
IP grade |
IP68 |
|||||||||
Power supply |
3.6V lithium battery |
|||||||||
Battery lifetime |
≥ 10 years |
|||||||||
Environment & mechanical condition |
Class C |
|||||||||
Electromagnetic compatibility |
E1 |
|||||||||
Heat (cooling) carrier |
conduit is full charged with water |
|||||||||
Installation mode |
at any angle |
Dimension
Nominal diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
L (mm) |
165 |
190 |
260 |
260 |
300 |
L1 (mm) |
97 |
97 |
97 |
97 |
97 |
L2 (mm) |
255 |
||||
H (mm) |
91 |
||||
H1 (mm) |
31 |
||||
W (mm) |
90 |
||||
Meter screw A (inch) |
G 3/4B |
G 1B |
G1 1/4B |
G1 1/2B |
G 2B |
Coupling screw B (inch) |
R1/2 |
R3/4 |
R1 |
R1 1/4 |
R1 1/2 |
Product detail pictures:
Related Product Guide:
Adhering into the theory of "quality, services, efficiency and growth", now we have gained trusts and praises from domestic and international shopper for Short Lead Time for Ultrasonic Water Flow Meter - SC7 Serials Water Meter – Lanry, The product will supply to all over the world, such as: Austria, Mali, Bolivia, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Diana from Atlanta - 2017.10.25 15:53
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Amy from Haiti - 2018.09.29 13:24