OEM/ODM Factory Measure Wastewater - SC7 Serials Water Meter – Lanry Detail:
Features
Key Technology Point
Display Description
Pressure Loss Curve
Dimension
Features
Above 10 years shelf life.
Installation at any angel, no influence for measurement accuracy.
Ultrasonic signal quality detection.
Photosensitive button, IP 68 design, longtime under water working.
Support optical, RS485 and wired & wireless M-bus communication interfaces.
Complies to MODBUS RTU and EN 13757 communication protocol.
Compile to drinkable water standard requirement.
Key Technology Point
Display Description
Pressure Loss Curve
Technical Parameter
Nominal Diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
|||||
Nominal Diameter Q3 (m3/h) |
2.5 |
4 |
6.3 |
10 |
16 |
|||||
Min flow rate Q1 (L/h) |
10 |
6.25 |
16 |
10 |
25.2 |
15.8 |
40 |
25 |
64 |
40 |
Pressure loss class △P |
63 |
63 |
40 |
40 |
40 |
|||||
Flow arte maximum reading (m3) |
99999.99999 |
|||||||||
Accuracy class |
Class 2 |
|||||||||
Maximum working pressure |
1.6MPa |
|||||||||
Temperature class |
T30/T50/T70 optional |
|||||||||
IP grade |
IP68 |
|||||||||
Power supply |
3.6V lithium battery |
|||||||||
Battery lifetime |
≥ 10 years |
|||||||||
Environment & mechanical condition |
Class C |
|||||||||
Electromagnetic compatibility |
E1 |
|||||||||
Heat (cooling) carrier |
conduit is full charged with water |
|||||||||
Installation mode |
at any angle |
Dimension
Nominal diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
L (mm) |
165 |
190 |
260 |
260 |
300 |
L1 (mm) |
97 |
97 |
97 |
97 |
97 |
L2 (mm) |
255 |
||||
H (mm) |
91 |
||||
H1 (mm) |
31 |
||||
W (mm) |
90 |
||||
Meter screw A (inch) |
G 3/4B |
G 1B |
G1 1/4B |
G1 1/2B |
G 2B |
Coupling screw B (inch) |
R1/2 |
R3/4 |
R1 |
R1 1/4 |
R1 1/2 |
Product detail pictures:
Related Product Guide:
To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for OEM/ODM Factory Measure Wastewater - SC7 Serials Water Meter – Lanry, The product will supply to all over the world, such as: Lyon, Maldives, Munich, We've more than 10 years exported experience and our products and solutions have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Mona from Washington - 2018.12.22 12:52
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Alva from Kenya - 2017.09.16 13:44