OEM/ODM Factory Measure Wastewater - SC7 Serials Water Meter – Lanry Detail:
Features
Key Technology Point
Display Description
Pressure Loss Curve
Dimension
Features
Above 10 years shelf life.
Installation at any angel, no influence for measurement accuracy.
Ultrasonic signal quality detection.
Photosensitive button, IP 68 design, longtime under water working.
Support optical, RS485 and wired & wireless M-bus communication interfaces.
Complies to MODBUS RTU and EN 13757 communication protocol.
Compile to drinkable water standard requirement.
Key Technology Point
Display Description
Pressure Loss Curve
Technical Parameter
Nominal Diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
|||||
Nominal Diameter Q3 (m3/h) |
2.5 |
4 |
6.3 |
10 |
16 |
|||||
Min flow rate Q1 (L/h) |
10 |
6.25 |
16 |
10 |
25.2 |
15.8 |
40 |
25 |
64 |
40 |
Pressure loss class △P |
63 |
63 |
40 |
40 |
40 |
|||||
Flow arte maximum reading (m3) |
99999.99999 |
|||||||||
Accuracy class |
Class 2 |
|||||||||
Maximum working pressure |
1.6MPa |
|||||||||
Temperature class |
T30/T50/T70 optional |
|||||||||
IP grade |
IP68 |
|||||||||
Power supply |
3.6V lithium battery |
|||||||||
Battery lifetime |
≥ 10 years |
|||||||||
Environment & mechanical condition |
Class C |
|||||||||
Electromagnetic compatibility |
E1 |
|||||||||
Heat (cooling) carrier |
conduit is full charged with water |
|||||||||
Installation mode |
at any angle |
Dimension
Nominal diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
L (mm) |
165 |
190 |
260 |
260 |
300 |
L1 (mm) |
97 |
97 |
97 |
97 |
97 |
L2 (mm) |
255 |
||||
H (mm) |
91 |
||||
H1 (mm) |
31 |
||||
W (mm) |
90 |
||||
Meter screw A (inch) |
G 3/4B |
G 1B |
G1 1/4B |
G1 1/2B |
G 2B |
Coupling screw B (inch) |
R1/2 |
R3/4 |
R1 |
R1 1/4 |
R1 1/2 |
Product detail pictures:
Related Product Guide:
We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for OEM/ODM Factory Measure Wastewater - SC7 Serials Water Meter – Lanry, The product will supply to all over the world, such as: Montreal, UAE, Hamburg, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Polly from Uganda - 2018.12.22 12:52
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Dawn from Bangladesh - 2018.10.09 19:07