Lowest Price for R500 Ultrasonic Water Meter - SC7 Serials Water Meter – Lanry Detail:
Features
Key Technology Point
Display Description
Pressure Loss Curve
Dimension
Features
Above 10 years shelf life.
Installation at any angel, no influence for measurement accuracy.
Ultrasonic signal quality detection.
Photosensitive button, IP 68 design, longtime under water working.
Support optical, RS485 and wired & wireless M-bus communication interfaces.
Complies to MODBUS RTU and EN 13757 communication protocol.
Compile to drinkable water standard requirement.
Key Technology Point
Display Description
Pressure Loss Curve
Technical Parameter
Nominal Diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
|||||
Nominal Diameter Q3 (m3/h) |
2.5 |
4 |
6.3 |
10 |
16 |
|||||
Min flow rate Q1 (L/h) |
10 |
6.25 |
16 |
10 |
25.2 |
15.8 |
40 |
25 |
64 |
40 |
Pressure loss class △P |
63 |
63 |
40 |
40 |
40 |
|||||
Flow arte maximum reading (m3) |
99999.99999 |
|||||||||
Accuracy class |
Class 2 |
|||||||||
Maximum working pressure |
1.6MPa |
|||||||||
Temperature class |
T30/T50/T70 optional |
|||||||||
IP grade |
IP68 |
|||||||||
Power supply |
3.6V lithium battery |
|||||||||
Battery lifetime |
≥ 10 years |
|||||||||
Environment & mechanical condition |
Class C |
|||||||||
Electromagnetic compatibility |
E1 |
|||||||||
Heat (cooling) carrier |
conduit is full charged with water |
|||||||||
Installation mode |
at any angle |
Dimension
Nominal diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
L (mm) |
165 |
190 |
260 |
260 |
300 |
L1 (mm) |
97 |
97 |
97 |
97 |
97 |
L2 (mm) |
255 |
||||
H (mm) |
91 |
||||
H1 (mm) |
31 |
||||
W (mm) |
90 |
||||
Meter screw A (inch) |
G 3/4B |
G 1B |
G1 1/4B |
G1 1/2B |
G 2B |
Coupling screw B (inch) |
R1/2 |
R3/4 |
R1 |
R1 1/4 |
R1 1/2 |
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Lowest Price for R500 Ultrasonic Water Meter - SC7 Serials Water Meter – Lanry, The product will supply to all over the world, such as: Tunisia, Berlin, Saudi Arabia, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Karl from Jersey - 2017.01.28 18:53
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Danny from Australia - 2017.02.18 15:54