Leading Manufacturer for Flow Meter For Chilled Water - clamp on doppler flow meter ultrasonic for raw water – Lanry Detail:
Description
Features
Specificaitons
Configuration Code
DF6100-EC Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.
The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays, OCT outputs.
Features
A wide range of flow measurement, high flow rate can reach 12m/s
High-temperature transducer is suitable to liquids of -35℃ ~ 200℃
Do not need to shut down the pipe flow when installing the transducers
User-friendly configuration
4-20mA, Relay and OCT outputs
Accuracy: 2.0% Calibrated span
Specificaitons
Transmitter:
| Measurement principle | Doppler ultrasonic |
| Resolution | 0.25mm/s |
| Repeatability | 0.2% of reading |
| Accuracy | 0.5% — 2.0% F.S. |
| Response time | 2-60s for optional |
| Flow Velocity Range | 0.05- 12 m/s |
| Liquid Types Supported | Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron. |
| Power Supply | AC: 85-265V DC: 24V/500mA |
| Enclosure type | Wall-mounted |
| Degree of protection | IP66 according to EN60529 |
| Operating temperature | -20℃ to +60℃ |
| Housing material | Fiberglass |
| Measurement Channels | 1 |
| Display | 2 line × 8 characters LCD, 8-digit rate or 8-digit total (resettable) |
| Units | User Configured (English and Metric) |
| Rate | Rate and Velocity Display |
| Totalized | gallons, ft³, barrels, lbs, liters, m³,kg |
| Communication | 4-20mA,Relay and OCT output |
| keypad | 4pcs buttons |
| Size | 244(h)*196(w)*114(d)mm |
| Weight | 2.4kg |
Transducer:
|
Transducers Type |
Clamp-on |
|
Degree of protection |
IP65. IP67 or IP68 according to EN60529 |
|
Suited Liquid Temperature |
Std. Temp.: -35℃~85℃ for short periods up to 120℃ |
|
High Temp.: -35℃~200℃ for short periods up to 250℃ |
|
|
Pipe diameter range |
40-4000 mm |
|
Transducer Size |
60(h)*34(w)*32(d)mm |
|
Material of transducer |
Aluminum for standard temp.sensor and peek for high temp.sensor |
|
Cable Length |
Std: 10m |
Configuration Code
| DF6100-EC | Wall-mounted Doppler Clamp-on Ultrasonic Flowmeter | |||||||||||||||||
| Power supply | ||||||||||||||||||
| A | 110VAC | |||||||||||||||||
| B | 220VAC | |||||||||||||||||
| D | 24VDC | |||||||||||||||||
| S | 65W Solar supply (including solar board) | |||||||||||||||||
| Output Selection 1 | ||||||||||||||||||
| N | N/A | |||||||||||||||||
| 1 | 4-20mA | |||||||||||||||||
| 2 | Relay | |||||||||||||||||
| 3 | OCT | |||||||||||||||||
| Output Selection 2 | ||||||||||||||||||
| Same as above | ||||||||||||||||||
| Sersor Type | ||||||||||||||||||
| S | Standard Clamp-on transducer (DN40-4000) | |||||||||||||||||
| Transducer Temperature | ||||||||||||||||||
| S | -35～85℃ (for short periods up to 120℃) | |||||||||||||||||
| H | -35～200℃ | |||||||||||||||||
| Pipeline Diameter | ||||||||||||||||||
| DNX | e.g.DN40—40mm, DN4000—4000mm | |||||||||||||||||
| Cable length | ||||||||||||||||||
| 10m | 10m (standard 10m) | |||||||||||||||||
| Xm | Common cable Max 300m(standard 10m) | |||||||||||||||||
| XmH | High temp. cable Max 300m | |||||||||||||||||
| DF6100-EC | — | B | — | 1 | — | N/LDC | — | D | — | S | — | DN100 | — | 10m | (example configuration) | |||
Product detail pictures:
Related Product Guide:
It adheres on the tenet "Honest, industrious, enterprising, innovative" to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for Leading Manufacturer for Flow Meter For Chilled Water - clamp on doppler flow meter ultrasonic for raw water – Lanry, The product will supply to all over the world, such as: Argentina, Australia, Indonesia, Since our establishment, we keep on improving our products and customer service. We are able to provide you with a wide range of high quality hair products at competitive prices. Also we can produce different hair products according to your samples. We insist on high quality and reasonable price. Except this, we provide best OEM service. We warmly welcome OEM orders and customers all over the world to cooperate with us for mutual development in the future.
By Modesty from Morocco - 2018.09.12 17:18
It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
By Alice from Saudi Arabia - 2017.02.28 14:19