dual-channel insertion ultrasonic flowmeter for food industry

Short Description:

TF1100-DI Dual-channel Insertion Transit Time Ultrasonic Flowmeter works on the transit-time method. It is ok to measure all kinds of liquids in fully filled pipe.The Insertion ultrasonic transducers (sensors) is hot-tapped mounting, there is no ultrasonic compound and coupling problem; Even though the transducers are inserted into pipe wall, they do not intrude into the flow, thus, do not generate disturbance or pressure drop to the flow. The insertion (wetted) type has the advantage of long-term stability and better accuracy. Two pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.

This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.

Send email to us

Features

Hot-tapped installation,no pipe line flow interrupted.

No moving parts,no pressure drop,no maintenance.

Spool-piece transducer for best accuracy and better long-term stability.

Insertion dual-channel flow transducers are suitable for high temperature of -35℃~200℃.

Wide bi-directional Flow range of 0.01 to 15m/s, and wide range of pipe sizes from DN65 to DN5000.

Thermal energy measurement capability can be optional.

Data logger function.

The heat measurement function by configuring with paired temperature sensors.

Applications

● Service and maintenance
● Replacement of defective devices
● Support of commissioning process and installation
● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves

● Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
● Petrochemical industry
● Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
● Refrigeration and air conditioning systems
● Food , beverage and pharmaceutical industry
● Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
● Metallurgy and mining applications
● Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.

Specifications

Transmitter:

Measurement principle	Ultrasonic transit-time difference correlation principle
Flow velocity range	0.01 to 15 m/s, bi-directional
Resolution	0.1mm/s
Repeatability	0.15% of reading
Accuracy	±0.5% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s
Response time	0.5s
Sensitivity	0.001m/s
Damping of displayed value	0-99s(selectable by user)
Liquid Types Supported	both clean and somewhat dirty liquids with turbidity <10000 ppm
Power Supply	AC: 85-265V DC: 24V/500mA
Enclosure type	Wall-mounted
Degree of protection	IP66 according to EN60529
Operating temperature	-10℃ to +60℃
Housing material	Fiberglass
Display	4.3’’ color LCD 5 lines display, 16 keys
Units	User Configured (English and Metric)
Rate	Rate and Velocity Display
Totalized	gallons, ft³, barrels, lbs, liters, m³,kg
Thermal energy	unit GJ，KWh can be optional
Communication	4~20mA(accuracy 0.1%),OCT, Relay, RS485 (Modbus),data logger
Security	Keypad lockout, system lockout
Size	244196114mm
Weight	2.4kg

Transducer:

Degree of protection	IP67 or IP68 according to EN60529
Suited Liquid Temperature	High Temp,:-35℃~150℃
Pipe diameter range	DN65-5000
Transducer Size	φ58*199mm
Material of transducer	Stainless Steel SUS304+Peek
Cable Length	Std: 10m
Temperature Sensor	PT1000 insertion or clamp-on Accuracy: ±0.1 %